Three of the four sections are all similarly made out of oak and appear to be co-contemporaneous in terms of style and materials (solid wood and metal). The final section, a five drawer insert is obviously of later manufacture and while stained brown with what appears to potentially be a mahogany frontispiece, has plastic trays with metal fittings and what appear to be galvanized steel card stops. The other sections comprise a low level table-like support with four legs; a 5×3 drawer section; and a 2 inch thick top which covers the holes in the top of the modular drawer sections and provides a flat surface. The top section also features the traditional Gaylord Bros., Inc. name plate.
Given the subtle intricacies of the construction, I’ll provide some photos of how the pieces dovetail together as well as the smaller mechanics and features in a future post.
Fully assembled the piece is 33″ wide x 17 3/8″ deep and stands 36 1/2″ tall. With internal drawer space of 13 3/4″ for the 15 drawers and 14 1/2″ for the other 5, there should be space for approximately 38,715 index cards.
I’m thrilled that all the fittings seem to be original, and all the drawers have their original card catalog rods. The drawers on the 5×3 drawer section have a spring loaded mechanism under the front of the drawer which when pushed to the left side unlocks the card catalog rods which have beefy brass knobs. The 5×1 drawer section rods are unlocked by pulling up on them slightly from the bottom and then pulling them straight out.
I’ll have to do some more in-depth research of old Gaylord Bros. catalogs, but based on materials, manufacture, and style, I’m going to guess that the older portion of the card catalog dates from the mid-30s to the 1940s, while the newer section is likely late 60s. The overall size and standardized, modular structure allows the pieces to sit together in quite a clever way and were made over a long enough period of time that different pieces from disparate decades still work well together. While the wood grain, stain, and even fittings are all slightly different, the to different styles work fairly well together.
For those who appreciated my recent article Market analysis of library card catalogs in 2023, I’m thrilled to report that I purchased this stunning beauty—one of the prettiest, oldest, and best conditioned catalogs I’ve seen listed—for a very reasonable $250. I suspect the seller, who is a vintage collector, seasoned eBay seller, and is well aware of the market, may have gone even lower, but I was happy to overpay a little. Given the online market, something like this would usually list for between $1,200 and $1,600, but would likely sit unsold and unloved for years.
I love the style and the condition, and it does make for a fantastic little piece of fine furniture with a lovely patina. Unexpectedly, someone else in the house may be even more enamored of it than I, which bodes well for its actual long term care and use. Currently it will serve as an archive storage for some of my 3 x 5″ index card note collection in addition to storage of a partial library card cataloging for some of our physical books. I also have cards from an older rolodex and a small recipe collection that will take up residence. Other empty drawers will house a small wine selection along with several bottles of scotch until they’re pushed out by the growing collection of cards.
Other than general maintenance I don’t think I’ll be doing any other restoration work on it beyond the small fixes I’ve already made.
On the top of the catalog, in addition to space for writing notes, I’ll keep one of my two desktop card indexes and a 1948 Smith-Corona Clipper.
What would you do with a library card catalog?