Overall Condition
Having purchased it “untested” as an auction item at bargain basement price, you’re never quite sure what to expect, you just pray for no major escapement damage and go from there. I fully expected to need to fix half a dozen bits and some heavy cleaning as I have with other machines. As it turned out, each part I began testing worked flawlessly and the machine is quite clean!
In general the machine is in near mint condition. There is one tiny brown discoloration spot on the case, but, the case being brown, it’s not very obvious. Beyond this, the case looks like it just came off the factory floor.
The machine was generally very clean and almost looks like it had been serviced and then not used since. There was some lint and dust on the bottom which wiped off easily and a quick blow out should clear the rest. There are one or two minor signs of wear to the powder coat on the front and a small bit of peeling on the bottom rear, but overall it’s been pretty well loved and probably not seen more than a few years of moderate use.
Everything functioned as expected save two required adjustments relating to how the slugs strike the platen. The capital letters were striking a tad higher than the lower case, but the adjustment for the UC “on feet” screw on the bottom of the typewriter fixed that issue fairly quickly. There’s also two separate brackets each with two screws that will require adjustment for the caps lock to be properly aligned as well; I’ll take care of that later this week sometime. I notice one or two small screws that could use some fine tuning as well, but I’ll get to that shortly as well. Interestingly there is already a YouTube video for some of these adjustments for this exact year model should anyone need it. Additionally, Theodore Monk has some details for alternate makes/models.
The serial number on the machine is QR3214352 which the Typewriter Database dates specifically to April 1957. This means that this machine will be 67 years old this coming Spring.
Keys
Unlike many early typewriters, this keyboard has a dedicated key for the “1”/”!” as well as a dedicated caps lock key for the right hand (in addition to the usual one for the left). Also present is a special “Tab” key on the right hand side just below the margin release “M.R.” key.
Other Functionality
In addition to some of the standard functionality, including tab settings which became common in the 1950s, this unit has an auto-reverse for the ribbon, 3 type select settings for finger pressure/action, and three line space selections. Richard Polt hosts versions of the Quiet-Riter manual (1955) as well as a parts catalog (1953) a service manual (1953).
Of particular note (and something I’ve never seen on a machine before) is a set of teeth on the platen which have a custom switch for fractional line spacing. This is useful for sub-script and super-script needs. It’s effectuated by pressing down on the line locating lever on the left side near the platen knob which then allows one to rotate the platen up or down the required amount to type the characters. When done, one switches the lever back to set the platen to the original line spacing. This would also have been useful on older machines for creating equal signs with two strikes of the hyphen, but isn’t needed on the Quiet-Riter which has a dedicated “=” key.
While the unit came with an all black ribbon in usable shape, I chose to switch it out with a new blue/black combination. The Quiet-Riter has the larger custom 2cm core rings and spools (and this unit had the original metal rings and covers), so I had to manually remove the plastic cores from the newer ribbon and carefully insert them into the machine so that when the spool empties the mechanical sensor will trip and automatically reverse the ribbon. Of course, given the set up one could also wind their own replacement ribbon as seen here:
Typeface Sample
The pitch on this machine is 12 characters per inch (elite). The full platen is 110 characters wide.
Sound
Photo Gallery
Mentions
Likes
Reposts