This one is is a 20 gauge solid steel behemoth Steelcase in black and silver powder coat and it is in stunning condition with all the hardware. It stands 52 1/4 inches tall, is 14 7/8 inches wide, and 28 1/2 inches deep (without hardware). Each drawer had two rows of card storage space totaling 55 inches. With 8 drawers, this should easily hold 61,000 index cards.
Sadly, someone has removed all the card following blocks. I’ll keep an eye out for replacements, but I’m unlikely to find some originals, though I could probably also custom design my own. In the meanwhile I find that a nice heavy old fashioned glass or a cellophaned block of 500 index cards serve the same functionality. The drawer dimensions are custom made for 4 x 6 inch index cards, but A6 cards and Exacompta’s 100 x 150mm cards fit comfortably as well.
Based on the styling, I’m guessing it dates from the 1940s to early 1960s, but there are no markings or indications, and it will take some research to see if I can pin down a more accurate date.
A few of the indexing label frames on the unit are upside down and one or two are loose, but that’s easily fixed by removing a screw and cover plate in the front of the drawer and making a quick adjustment. I’ve also got a few extra metal clips to fix the loose frames.
Much like my Singer card index, this one has internal sliding metal chassis into which the individual drawers sit. This allows them to be easily slid out of the cabinet individually for use on my desk or away from the cabinet. The drawers come with built-in handles at the back of the drawer for making carrying them around as trays more comfortable. The drawers are 10.6 pounds each, each chassis is 4.6 pounds, and the cabinet itself is probably 120 pounds giving the entire assembly a curb weight of about 240 pounds. Given that 7,000 index cards weight 29.3 pounds, fully loaded the cabinet and cards would weigh almost 500 pounds.
Placed just behind my desk, I notice that the drawer width is just wide enough, that I can pull out the fourth drawer from the bottom and set my Smith-Corona Clipper on top of it. This makes for a lovely makeshift typing desk. The filing cabinet’s black powder coat is a pretty close match to that of the typewriter.
I’ve already moved the majority of my cards into it and plan to use it as my daily driver. This may mean that the Singer becomes overflow storage once I’m done refurbishing it. The Shaw-Walker box, which was just becoming too full and taking up a lot of desk real estate, will find a life in the kitchen or by the bar as my recipe box.
I’ve also noticed that some of my smaller 3 x 5″ wooden card indexes sit quite comfortably into the empty drawers as a means of clearing off some desk space if I wish. Of course, the benefit of clearing off some desk space for that means that I can now remove individual drawers for working with large sections at a time.
This may be my last box acquisition for a while. Someone said if I were to add any more, I’ll have moved beyond hobbyist collector and into the realm of museum curator.
The best part of the size and shape of the drawers is that until its full of index cards, I can use some of the additional space for a variety of additional stationery storage including fountain pens, ink, stamps, stamp pads, pen rolls, pencils, colored pencils, tape, washi, typewriter ribbon, stencils etc. One of the drawers also already has a collection of 3.5 x 5.5 inch pocket notebooks (most are Field Notes) which are also easily archivable within it.
@chrisaldrich Ooof this looks like it would survive a couple of doomsday scenarios
@chrisaldrich That is a beauty. Vintage Steelcase was built to last, it looks new. Congrats.
Someone asked about how the cabinet sounds, so here’s a sample of a drawer being opened and then closed:
A perfect sound to use, when opening a Zettelkasten app 😉
Syndicated copies:
Thank you for this. The desire to hear it was in my head the moment I came across the photo of your office area.
I’m glad you liked it. My wife has been urging me to record an ASMR session of my office space with the drawers and typewriter for months now.
One of the drawers on the Steelcase card cabinet was sticking. After 10 minutes of comparison and troubleshooting, it turns out one of the rails on the chassis was bent enough to jam the ball bearing from rolling. Unsticking it and then a quick hammer to put the rail back in place has fixed it.
@chrisaldrich
Building your own personal Mundaneum there?
On a quick front-of-the-index card calculation, I realize that with the recent Steelcase cabinet acquisition, I now have 8 boxes comprising 61 drawers and 103.25 feet of storage space for approximately 172,296 index cards. Having spent a total of $786.52 on them over the past year this comes out at about $12.89 per drawer, which is fantastically under the $14-25 ubiquitous 11″ cardboard boxes for such a massive step up in quality and longevity.
Wow! This is BEAUTIFUL! I feel inspired.
I’m going to refurbish the two Steelmaster 2-drawer sets that I was given a while back. I’ll use the black powder coat paint for the chassis, and the grey for the drawers.
Interestingly, I live in Fresno, CA, and that’s the first city of five listed on the Steelmaster label on the bottom. I’m guessing mine are the F4616D 4x6x16 double-drawer, and I have two of them.
Be sure to post some photos of them when you’ve finished. I’d love to see them.