Tag: vintage furniture
Steelcase 8 Drawer Steel Card Index Filing Cabinet for 4 x 6 inch cards
This one is is a 20 gauge solid steel behemoth Steelcase in black and silver powder coat and it is in stunning condition with all the hardware. It stands 52 1/4 inches tall, is 14 7/8 inches wide, and 28 1/2 inches deep (without hardware). Each drawer had two rows of card storage space totaling 55 inches. With 8 drawers, this should easily hold 61,000 index cards.
Sadly, someone has removed all the card following blocks. I’ll keep an eye out for replacements, but I’m unlikely to find some originals, though I could probably also custom design my own. In the meanwhile I find that a nice heavy old fashioned glass or a cellophaned block of 500 index cards serve the same functionality. The drawer dimensions are custom made for 4 x 6 inch index cards, but A6 cards and Exacompta’s 100 x 150mm cards fit comfortably as well.
Based on the styling, I’m guessing it dates from the 1940s to early 1960s, but there are no markings or indications, and it will take some research to see if I can pin down a more accurate date.
A few of the indexing label frames on the unit are upside down and one or two are loose, but that’s easily fixed by removing a screw and cover plate in the front of the drawer and making a quick adjustment. I’ve also got a few extra metal clips to fix the loose frames.
Much like my Singer card index, this one has internal sliding metal chassis into which the individual drawers sit. This allows them to be easily slid out of the cabinet individually for use on my desk or away from the cabinet. The drawers come with built-in handles at the back of the drawer for making carrying them around as trays more comfortable. The drawers are 10.6 pounds each, each chassis is 4.6 pounds, and the cabinet itself is probably 120 pounds giving the entire assembly a curb weight of about 240 pounds. Given that 7,000 index cards weight 29.3 pounds, fully loaded the cabinet and cards would weigh almost 500 pounds.
Placed just behind my desk, I notice that the drawer width is just wide enough, that I can pull out the fourth drawer from the bottom and set my Smith-Corona Clipper on top of it. This makes for a lovely makeshift typing desk. The filing cabinet’s black powder coat is a pretty close match to that of the typewriter.
I’ve already moved the majority of my cards into it and plan to use it as my daily driver. This may mean that the Singer becomes overflow storage once I’m done refurbishing it. The Shaw-Walker box, which was just becoming too full and taking up a lot of desk real estate, will find a life in the kitchen or by the bar as my recipe box.
I’ve also noticed that some of my smaller 3 x 5″ wooden card indexes sit quite comfortably into the empty drawers as a means of clearing off some desk space if I wish. Of course, the benefit of clearing off some desk space for that means that I can now remove individual drawers for working with large sections at a time.
This may be my last box acquisition for a while. Someone said if I were to add any more, I’ll have moved beyond hobbyist collector and into the realm of museum curator.
The best part of the size and shape of the drawers is that until its full of index cards, I can use some of the additional space for a variety of additional stationery storage including fountain pens, ink, stamps, stamp pads, pen rolls, pencils, colored pencils, tape, washi, typewriter ribbon, stencils etc. One of the drawers also already has a collection of 3.5 x 5.5 inch pocket notebooks (most are Field Notes) which are also easily archivable within it.
Acquisition: Shaw-Walker Furniture Company 4 drawer vintage filing cabinet
It contained a handful of paperclips, some sewing patterns, and some check stubs from 1976. I suspect it’s likely from the late 40s to early 60s, but it’ll require some research to track down a more specific manufacturing date as the interior has no immediate clues.
Given the general condition and rust, I think I’m going to fast track it for refinishing this month before I tackle the monster, which portends quite a bit more work and effort.
It’s now been redubbed the Quidditch chair by the household.
Refinished Architect’s Table from The General Fireproofing Co.
The Newest Piece Comes Home
It’s been far too long since I’ve done a furniture refurbish project, so it’s extra nice to finally have this fantastic piece move into the family room today.
I’ll probably post something more detailed at a later date with some “before” pictures, but these few “after” photos will have to suffice for now.
History
I acquired this 20 gauge steel, stick leg, architect’s table originally manufactured by The General Fireproofing Co. of Youngstown, Ohio eight or so years back as part of a scrap sale. It was once owned by the National Bureau of Standards and had some markings and scrap paper hiding underneath the drawer which made me think that it was previously owned by a college, university, or similar institution in the Southern California region. It’s been hiding patiently in the garage as a general work table in service to my Little Free Library. I’ll have to dig into some paperwork to find it, but I recall this being circa 1959 from my research. It wasn’t in as bad a condition as some of my past projects. The original linoleum top was almost in good enough condition that I seriously considered keeping it.
Refinishing and Specifications
I started cleaning it up in November 2021 and have finally moved it into the house today with a 1/4″ clear annealed 29 3/4″ x 49 3/4″ polished glass top with 1 1/2″ radius corners.
The table itself is refinished in an electric sort of robin’s egg-color called “Waterfall” (SW 6750, loc #162-C1; DE 5722 RL#267, LRV 68, Munsell: Hue=7.36BG, Value=8.5, Chroma=2.6; BM 2050-50, LRV 55.75). The original linoleum top, which actually wasn’t in horrible condition, was completely stripped off, and I did the same sort of brushed steel process as my last tanker desk. There is a bit of blemish on the table top surface in the form of black flecking with a few small manufacturing blemishes that were left untouched for show before throwing down eight layers of clear coat. I also left a few incredibly minor dings to the body and legs for character instead of doing any bondo work.
It’s still got the original General Fireproofing Co. badging. I’ve also left all the original drawer pulls and metal leg caps, though I’ve cleaned them up quite a bit. It has presently got all the original screws, nuts and bolts as well, though many are rusted and in poor though functional condition. Perhaps I’ll replace those with new fittings in the near future, but I’ll have to hunt down the specs and find something that will stand up a bit better for the next century.
I’ve added some 1/2″ thick heavy felt pads on the feet to prevent scratching on the floor as the table is quite heavy. I’ve also got some temporary cork pads between the tabletop and the glass which I’ll probably replace with some decorative felt sometime soon.
You never know what you’ll find when you strip the tops of these types of pieces, but all-in it came out far better than I expected. It truly is stunning.
What’s next?
Still in the queue for future projects, two stick leg chairs, a panel leg architect’s table, and a 1930’s double pedestal tanker desk all of which I have on hand. I’m also due to reupholster a few chairs. If anyone comes across any, I’m on the look out for a 4×6″ index card filing cabinet, a multi-drawer flat file I can convert into a coffee table, and a credenza.
Commissions
I’ve done this enough times now, I’m contemplating taking commissions from folks who have ideas for pieces. I’ve seen some of the tanker desks go for between $3,000 and $5,000 on Melrose or at HD Buttercup in Los Angeles, but by comparison, I’ve got a far better finishing process for these with better results than I’ve seen in any of the high end showrooms. With the right price on a scrapped or distressed piece, I think I can significantly beat the high end shops and provide a better look and value.
I suspect that when I refinish my next tanker desk for my office, I might be willing to sell the one I’ve been using for the past 13 years.
👓 Wife ordered this little friend for our home library. | gmatthewthurman
Wife ordered this little friend for our home library.
Vintage Tanker Desk Hobby
Late last year, I found a couple from the 1950’s and 60’s that were in horrible physical shape that were going to be scrapped for their steel. I got both of them for $10 bucks and did some research on how to refurbish them myself.
I stripped off the corroded, stained, and torn linoleum off the tops, took them to a local place that does sandblasting to have them stripped and then sanded down the heavily rusting portions. (These desks are usually made of heavy 20 gauge solid steel, so they’re literally the “tanks” of office furniture.) Both were in relatively good condition structurally and didn’t have any significant body damage aside from some significant rust, so I decided not to bondo the couple of dings they had, which in the end I think just adds to their vintage beauty.
For the blue/gray one I found an industrial paint shop to do an old style enamel process. For the smaller red one, I sandblasted and painted/sealed the undercarriage and inside drawers and then used a special brushing process to obtain a nice brushed steel effect followed by a 5 layer clear coat seal to give it a high shine while still having the brushed steel visible through the clear coat.
Finally, I tried to find a place to recreate the original linoleum desktops, but there really isnt’ a supplier who does this and some of the alternatives were prohibitively expensive as was the process of redoing the metal trim to hold it on after the fact. I contemplated doing some various laminates and even formica, but ultimately decided that the bare metal top was too pretty to cover up. I finally gave a local glass shop a template for the top of the desk and had them cut out custom 1/4″ glass tops with rounded corners to match the desk shape and then bevel the edges slightly.
At long last they’re now both finished! They are truly beautiful and it’s nice having a desk about the size of a compact car and certainly as heavy! When I originally got the desks, Sonia refused to let me keep them they were in such terrible shape, and I spent a while convincing her to let me keep them. Once the first one was done she forbid me to “hide” it in our office and insisted that I put it in our living room because it was so pretty. I finally got the second one finished and gave it to her for her birthday in September.
It’s been an interesting enough process with such a beautiful end result, that I’m in the midst of acquiring a few additional desks including one that may be from the 30’s/40’s with some nice art deco design touches.
So I suppose I’m calling it my “hobby” at the moment.
I’ve posted a gallery of additional photos of the desks on Flickr.