Typewriter ribbon unboxing! I bought a full reel of 660 yards of blue/green bichrome 1/2″ nylon typewriter ribbon from Fine Line Ribbon in Ennis, TX. It arrived yesterday, just in time for some use over the weekend. I’ve now got enough for more than 41 universal 2″ diameter (16 yard) spools, so I should be able to ribbon up my entire collection and have some left over.
“I’m always trying to get back to the 20s a little bit.”
—John Dickerson, in Field Notes interview (2016)
Perhaps lamenting too much technology, Dickerson says he’s got two screens on the computer in his office as well as an iPad and a phone. But he’s also got “a notebook [that] does only one thing”. He’s also got an old black lacquer Underwood standard typewriter (No. 4, 5, or 6?) on his office desk. Typewriters only do one thing too.
Wonder if he still uses it?
On July 15, 2024 I acquired an oak filing cabinet with 16 drawers for 3 x 5 inch index card storage. It’s a warm and lovely piece of antique furniture as well as an excellent example of an early 20th century card index cabinet designed for business use and a paper-based pre-cursor of our more modern computer databases.
From the exterior, there were none of the typical metal badging or decals printed on the filing cabinet to give an idea of the manufacturer of which there were several dozens in the early 1900s.
It wasn’t until I began dismantling the cabinet for cleaning and some restoration that I found one of the four sectional inserts stamped with the words “Macey Inter-Inter / [unintelligible] / No. 1535 C.I.”. The three others had partial versions of a similar stamp, but only the “No. 1535 C.I.” portion is easily discerned without better imaging. Without needing to look it up, I immediately recognized the Macey name as the early 1900s mail order furniture company of Fred Macey which was renamed The Macey Co. and which also helped to get the still extant Steelcase company off the ground. This was a nice thrill for me as I didn’t have any Macey Company furniture in my collection yet.
![Several wooden slats glued together with a faint black ink stamp on them that reads: "MACEY / INTER-INTER / [unintelligible] / NO. 1535 C.I."](https://i0.wp.com/boffosocko.com/wp-content/uploads/2024/09/wp-17254227881654347772868053808571-e1725517903559.jpg?resize=660%2C495&ssl=1)
My new-to-me filing cabinet is a Macey Company No. 15 Cabinet with four inserts of the No. 1535 C.I. card index frames which each hold 4 drawers for 3 x 5 inch index cards. This gives me an additional 16 drawers of storage each of which has a linear capacity of 16.25 inches for the drawers with card stops. (5 of the drawers are sadly missing either the metal slide hardware and/or card stops altogether.)
The cabinet frame is 61.1 pounds and each 1535 C.I. section (including its 4 drawers) is 17.9 pounds. This gives the entire cabinet in my configuration a curb weight of 132.7 pounds when empty.
A Macey Company catalog No. 4206 “Macey Filing Appliances” from 1906 lists the shipping weight of the filing cabinet frame at 75 pounds and sold it for $7.00. Each of the No. 1535-C.I. sections had shipping weights of 30 pounds and listed for $4.00. The complete case with 16 drawers was listed for $22.00. Adjusted for inflation from 1906 to 2024, this would be roughly $770.00.
The catalog listed the capacity of their 16 inch drawers at 1,950 light (or thin) cards, 1,550 medium cards, or 1,200 heavy cards plus 40 thicker divider cards.
For most of the (modern) index cards I tend to use, I’m guestimating that I can get 2,250 cards in each drawer giving me an approximate capacity of 36,000 for the entire cabinet. With a quick back-of-the-index card calculation, this would add about 110 pounds to the weight of the cabinet when full.
The catalog describes the cabinet as made of “quarter sawed oak” with “velvet gold finish” and solid cast brass trimmings. This roughly squares with the materials on my version. The catalog indicated that versions with card rods were available for an additional 25 cents per drawer, but mine doesn’t have any present. The metal clamps on the card stops do have an appropriately spaced hole in them which should make it easy to drill holes in both the front of the drawer and the card stop itself to install rods pretty quickly and easily at the factory.
The Macey Company had been around just before the turn of the century under the name Fred Macey Furniture, Ltd., so without better catalogs with parts numbers, the best range I can currently give to date my card index is roughly about 1900-1940. It couldn’t have been manufactured after 1940 as this was when The Macey Company went out of business.
The “Inter-Inter” brand marking on my drawers is a shortening of “Interchangeable Interiors” a method of sectional filing cabinetry as described in the company’s catalog. One would first select an outer cabinet or shell from one of four widths. After this, they would select the sorts of storage they needed within that shell from a variety of options including: vertical letter file drawer, deep storage drawer (for stationery and supplies), 3 x 5 card index drawers, 8 x 5 card index drawers, medium storage drawers (11″ x 2 3/4″ x 17 1/4″), legal blank drawers (for legal blanks, electrotypes, drawings, etc.), small or large cupboards with doors, flat letter file drawers, document file drawers, check file drawers, vertical cap file drawers (“suitable for filing legal blanks, legal documents (without folding) large photographs, blue prints, etc.”), deep storage drawers, 4 x 6 card index drawers, and etc.
The modularity of the system allows for a wide variety of storage needs. It also likely accounts for some difference in the drawers within my particular unit which may have been ordered a few years apart and mixed-and-matched over time as the original owner’s needs changed.
Now that I know about this modular system, I’ll be on the look out for other versions and alternate inserts in the secondary market. (I’m still looking for that 4 x 6 inch version…) Based on the systematic numbering in the catalog, the insert pieces seem to be the labeled with the width in inches of the exterior case followed by the numbers for the dimensions of the index cards. Thus the 3 x 5 inch index card sectional for a 15 inch cabinet is 1535 C.I. where the initials indicate “Card Index”. Thus we could correctly presume the 4 x 6 inch card index insert would be 1846 C.I. since the 4 x 6 modular insert fits into their 18 inch wide cabinet.
In the late spring of 2024, I saw what I thought was a 4 x 6 inch oak card index cabinet pop up in the listings on Facebook Marketplace for over $1,000 in Studio City, CA. Knowing that it was likely to sit unloved at that price, I bookmarked and waited. It quickly came down several times over a few weeks to the point I worried someone might actually snipe it. Watching the price reduction over a few weeks, I knew the seller was motivated, so I sent her a message with some data about actual sales of these and made an offer which was promptly accepted. A half hour later I was on my way to pick it up.
Of course I had been searching for an oak 4 x 6 inch card index filing cabinet for a while, but I was disappointed after seeing the details in her listing that the drawers were each 6-1/8″ wide x 4-6/8″ high to see that it was actually a 3 x 5 inch card index. (Her measurements were for the outside and not the inside.) Knowing that the piece was lovely and special, I succumbed anyway and took it.
I had double-checked the larger cabinet measurements before leaving to pick it up, but I was surprised to see that it barely fit into the back seat of my Lexus ES350!
While owned—though probably not heavily used—for about 42 years by a production manager in Studio City, this cabinet was previously used as a set decoration on the 1982 NBC television series Cassie & Co. starring Angie Dickinson. With the tag line “Ex-cop. New private eye. All woman!”, the show could be viewed as a follow up of Dickinson’s popular NBC show Police Woman (1974-1978). It appeared as a mid-season pick up following on the heels of the female two-hander Cagney and Lacey (1981-1988) and appeared in the Winter before NBC’s Remington Steele (1982-1987)—also featuring a female private detective—that premiered in the fall of 1982. Sadly Cassie & Co. only ran for 13 episodes before shuttering.
Here was part of the sales description for the cabinet when I purchased it:
This lovely old file cabinet is 52″ high x 14-3/4″ wide x 27-1/2″ deep. Each drawer is 6-1/8″ wide x 4-6/8″ high x 18-1/4″ deep. It has a few scratches on the side, but nothing that can’t be touched up. Otherwise, it’s in good condition. In the early 80’s, I worked on a TV series called “Cassie & Co.” starring Angie Dickinson. This (and another antique file cabinet) was purchased and used as set dressing in Angie/Cassie’s office. When the show was canceled, I bought the cabinets and have had them ever since. I don’t have specific background info on them.
Naturally as a filing cabinet that is likely over 100 years old, it has seen some things. (And like Burt Bacharach and Frank Sinatra, it had a relationship with Angie Dickinson.) There are a number of scratches and dings in the top where pulling out drawers and setting them on top has obviously occurred. There were several white scuffs where the cabinet has rubbed up against painted walls or other furniture.
Prior to discovering the manufacturer and knowing about the modularity, I instinctively knew to remove the four screws in the front of the cabinet to see what they were attaching to and how. This led to the ability to pull out the four modular sections to see the interior of the cabinet which, in turn, led to identifying the manufacturer.
Based on the magnificently dirty and dusty internal condition of the cabinet, I think I’ve been the only person to open them up in over half a century. This took a few hours of vacuuming and careful cleaning to properly mitigate.
I then spent some time tapping several dozen nails back into place with an awl and re-gluing some of the loose dovetail joins. I’ve also filled in a few of the scratches and scuffs, given the full cabinet a complete cleaning, and followed up with a thorough polish.
One missing piece that I’ll have to recreate is a 26 inch strip of hardwood which serves a sled-like function for moving/sliding the cabinet. It’s missing from the bottom left hand side of the filing cabinet frame, but fortunately has a complete version on the right hand side that I can use to recreate the missing portion. It’s not necessary for regular use, but it does help to protect the bottom edge of the filing cabinet from wear and chipping.
There are surely a few more small issues here or there that will require some additional attention as I begin using it, but in general, this cabinet is ready for another century of use.
Naturally, while removing the drawers and internal sectional pieces, I noticed that the openings in the cabinet were just the right size and depth that each of the four sectional openings is capable of storing two portable typewriters each.
While I’ll be using this as a traditional card index, I could easily see someone removing one or more of the four sections to store their office typewriter. As a decorative test, I moved the cabinet next to my library card cabinet and loaded it up with some Olympia, Smith-Corona, Remington, and Royal typewriters. One could certainly do worse. After all, Fred Macy did custom manufacture desks for typewriter specific use.
Recalculating from my collection of card indexes, I think this new cabinet brings our total up to 9 “boxes” with a total of 77 drawers featuring almost 125 linear feet of index card storage space. This comes out to the possibility of storing 208,183 index cards, with a cost per drawer hovering around $12.70 and still dropping.
In solid quarter sawn oak with solid cast brass fittings, it certainly classes up the collection significantly.
Now I just need to negotiate with my partner where this lovely piece of furniture will live in the house… or what will become relegated to the garage? At the moment, maybe this spot works?
What should I put into it first? Maybe since I’m not using X (fka Twitter) anymore, I’ll print all my tweets out and archive them in one of the drawers? Feel free to send me your favorite recipes on index cards as I’ve now got some extra space for them.
Below are some additional photos from the acquisition and cleaning process.
I sometimes use one of the four typewriters behind my desk for logging. (Another benefit of using cards.) I put in a new card in the morning and add/cross out as I go throughout the day. I often use one of the other typewriters to write out slightly longer mini-diary entries about particular things as I go. This helps me get away from computer screens, even if it’s only for short breaks throughout the day.
Happy to answer any questions people have about the practice. (Prior AMA here.)
Today’s office. We’ve got a newly finished Shaw-Walker filing cabinet and a 1955 Royal HH standard typewriter.
This one is is a 20 gauge solid steel behemoth Steelcase in black and silver powder coat and it is in stunning condition with all the hardware. It stands 52 1/4 inches tall, is 14 7/8 inches wide, and 28 1/2 inches deep (without hardware). Each drawer had two rows of card storage space totaling 55 inches. With 8 drawers, this should easily hold 61,000 index cards.
Sadly, someone has removed all the card following blocks. I’ll keep an eye out for replacements, but I’m unlikely to find some originals, though I could probably also custom design my own. In the meanwhile I find that a nice heavy old fashioned glass or a cellophaned block of 500 index cards serve the same functionality. The drawer dimensions are custom made for 4 x 6 inch index cards, but A6 cards and Exacompta’s 100 x 150mm cards fit comfortably as well.
Based on the styling, I’m guessing it dates from the 1940s to early 1960s, but there are no markings or indications, and it will take some research to see if I can pin down a more accurate date.
A few of the indexing label frames on the unit are upside down and one or two are loose, but that’s easily fixed by removing a screw and cover plate in the front of the drawer and making a quick adjustment. I’ve also got a few extra metal clips to fix the loose frames.
Much like my Singer card index, this one has internal sliding metal chassis into which the individual drawers sit. This allows them to be easily slid out of the cabinet individually for use on my desk or away from the cabinet. The drawers come with built-in handles at the back of the drawer for making carrying them around as trays more comfortable. The drawers are 10.6 pounds each, each chassis is 4.6 pounds, and the cabinet itself is probably 120 pounds giving the entire assembly a curb weight of about 240 pounds. Given that 7,000 index cards weight 29.3 pounds, fully loaded the cabinet and cards would weigh almost 500 pounds.
Placed just behind my desk, I notice that the drawer width is just wide enough, that I can pull out the fourth drawer from the bottom and set my Smith-Corona Clipper on top of it. This makes for a lovely makeshift typing desk. The filing cabinet’s black powder coat is a pretty close match to that of the typewriter.
I’ve already moved the majority of my cards into it and plan to use it as my daily driver. This may mean that the Singer becomes overflow storage once I’m done refurbishing it. The Shaw-Walker box, which was just becoming too full and taking up a lot of desk real estate, will find a life in the kitchen or by the bar as my recipe box.
I’ve also noticed that some of my smaller 3 x 5″ wooden card indexes sit quite comfortably into the empty drawers as a means of clearing off some desk space if I wish. Of course, the benefit of clearing off some desk space for that means that I can now remove individual drawers for working with large sections at a time.
This may be my last box acquisition for a while. Someone said if I were to add any more, I’ll have moved beyond hobbyist collector and into the realm of museum curator.
The best part of the size and shape of the drawers is that until its full of index cards, I can use some of the additional space for a variety of additional stationery storage including fountain pens, ink, stamps, stamp pads, pen rolls, pencils, colored pencils, tape, washi, typewriter ribbon, stencils etc. One of the drawers also already has a collection of 3.5 x 5.5 inch pocket notebooks (most are Field Notes) which are also easily archivable within it.
cygnoir (cygnoir.net)Nearly two years later, I’m reviving the idea of a Micro.blog meetup for analog tools like paper and notebooks, pens and ink, pencils, stationery, planners and journals, typewriters, index cards, etc. Thirteen intrepid fans of analog tools filled out the survey last time, and the majority thought a one-hour Zoom meeting each month would be the best way to start. Timing is everything, in so many realms, and this one is no different. I’m available to host this meetup every third Saturday of the month from 9-10 a.m. PST. That would make our first meetup on Saturday, January 20th.
